EFFECT OF MAGNETIC FIELD ON THE PHYSICAL AND CHEMICAL PROPERTIES OF FLOWING LUBRICATING COOLING LIQUIDS USED IN THE MANUFACTURING PROCESS

Erkin Umarov; Umidjon Mardonov; Khusniddin Abdirakhmonov; Abdugani Eshkulov; Behzod Rakhmatov

doi:10.31436/iiumej.v22i2.1768

Authors

Umarov Erkin Tashkent state technical university https://orcid.org/0000-0002-2819-0024
Umidjon Mardonov Tashkent state technical university https://orcid.org/0000-0003-3327-1846
Khusniddin Abdirakhmonov Tashkent state technical university https://orcid.org/0000-0001-9408-2016
Abdugani Eshkulov Tashkent state technical university https://orcid.org/0000-0002-4351-0751
Behzod Rakhmatov Tashkent institute of chemical technologies https://orcid.org/0000-0001-6564-5983

DOI:

https://doi.org/10.31436/iiumej.v22i2.1768

Keywords:

Boiling point, cutting, liquid, magnetic field, manufacture

Abstract

In this paper, the effect of magnetic field on lubricating cooling liquids, which are used in the cutting process in manufacturing, was studied. We chose three different lubricating cooling liquids that are commonly used in local manufacturing factories to conduct the experiment. Three main properties of these lubricoolants, boiling point, kinematic viscosity, and density, were analysed after magnetizing them. The magnetization processes were conducted in two conditions of liquids. At the first stage, the authors magnetized the liquids in stationary conditions; at the second stage, they magnetized the flowing liquids and analysed the difference among all the obtained results. This article shows the results of the comparisons and analyses the magnetic field influence on different types of fluids. Moreover, the paper investigates the dependence of magnetic field strength on the influence of magnetic field on liquids. It was found that the examined three parameters of liquids were changed after magnetic field treatment. The finding of this research offered a simple approach to improve the lubricating and cooling process in machining details in manufacturing.

ABSTRAK: Dalam makalah ini, pengaruh medan magnet pada cecair pendingin pelincir, yang digunakan dalam proses pemotongan dalam pembuatan, telah dikaji. Kami memilih tiga cecair penyejuk pelincir berbeza yang biasa digunakan di kilang pembuatan tempatan untuk menjalankan eksperimen. Tiga sifat utama pelincir ini seperti takat didih, kelikatan kinematik, dan ketumpatan dianalisis setelah memagnetkannya. Proses pembesaran dilakukan dalam dua keadaan cecair. Pada peringkat pertama, kami memagnetkan cecair dalam keadaan pegun dan membandingkan hasilnya; pada peringkat kedua, kami memagnetkan cecair semasa mengalir dan menganalisis perbezaan antara hasil yang diperoleh. Artikel menunjukkan hasil perbandingan ini dan menganalisis pengaruh medan magnet pada pelbagai jenis cecair. Lebih-lebih lagi, makalah ini meneliti pergantungan kekuatan medan magnet terhadap pengaruh medan magnet pada cecair. Didapati bahawa tiga parameter cecair yang diperiksa diubah setelah rawatan medan magnet. Penemuan penyelidikan ini menawarkan pendekatan mudah untuk meningkatkan proses pelinciran dan penyejukan dalam perincian mesin dalam pembuatan.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Author Biographies

Umarov Erkin, Tashkent state technical university

Material science department

Khusniddin Abdirakhmonov, Tashkent state technical university

Technology of mechanical engineering department

Abdugani Eshkulov, Tashkent state technical university

Department of physics

Behzod Rakhmatov, Tashkent institute of chemical technologies

Faculty of Chemical technology of inorganic substances

References

Nikolskiy VY. (2017) Primenenie elektromagnitnyx poley dlya intensifikatsii teplomassoobmena v sovme?ennyx gazojidkostnyx protsessax [Application of electromagnetic fields to intensify heat and mass transfer in combined gas-liquid processes]. Vostochno-Yevropeyskiy Jurnal Peredovyx Texnologiy, 3(8): 1729-3774. https://media.neliti.com/media/publications/307213-application-of-electromagnetic-fields-fo-6a3064eb.pdf

Rashid FL, Hassan NM. (2013) Increasing water evaporation rate by magnetic field. International Science and Investigation Journal, 2: 61-68. http://isijournal.info/journals/index.php/ISIJ/article/view/12

Amiri MC, Dadkhah AA. (2006) On reduction in the surface tension of water due to magnetic treatment. Colloids and Surfaces A: Physicochemical and Engineering Aspects: 278(1-3): 252-55. https://doi.org/10.1016/j.colsurfa.2005.12.046 DOI: https://doi.org/10.1016/j.colsurfa.2005.12.046

Tyrtygin VN, Sobgayda NA, Potexa VL, Shayxiev IG, Makarova YA. (2013) Vliyanie elektromagnitnogo impulsnogo polya na mikrofloru smazochno-oxlajdayu?ey jidkosti [Influence of the electromagnetic pulse field on the microflora of the cutting fluid]. Vestnik Kazanskogo texnologicheskogo universiteta, 16(3):176-178.

https://cyberleninka.ru/article/n/vliyanie-elektromagnitnogo-impulsnogo-polya-na-mikrofloru-smazochno-ohlazhdayuschey-zhidkosti/viewer

Ageev IM, Shishkin GG, Yeskin S. (2007) Izuchenie Vliyaniya Nizkochastotnogo Magnitnogo Polya Na Vodu [Study of the Effect of Low Frequency Magnetic Field on Water]. Raditexnika i Electronica, 28: 8-16. https://www.elibrary.ru/item.asp?id=10412034

Hassan SM, Ridzwan AR. (2016) Effects of exposure to magnetic field on water properties and hatchability of Artemia salina. ARPN Journal of Earth Sciences, 11(11): 416-23.

Christian B. (2019) Functionalized magnetic particles for water treatment. Heliyon, 5(8): 1-7. https://doi.org/10.1016/j.heliyon.2019.e02325 DOI: https://doi.org/10.1016/j.heliyon.2019.e02325

Umarov EO, Mardonov UT, Shoazimova UK. (2020) Influence of the magnetic field on the viscosity coefficient of lubricoolant that is used in the cutting proces. International Journal of Mechatronics and Applied Mechanics, 8(2): 144-149.

https://www.doi.org/10.17683/ijomam/issue8.50

Liu B, Gao B, Xu X. (2011) The combined use of magnetic field and iron-based complex in advanced treatment of pulp and paper wastewater. Chem Eng J, 178(1): 232-238. https://doi.org/10.1016/j.cej.2 011.10.058 DOI: https://doi.org/10.1016/j.cej.2011.10.058

Manyà JJ, Jr MJA, Kinoshita CK, Stephen MM. (2011). Specific heat capacity of pure water at 4.0 MPa between 298.15 and 465.65 K. Ind Eng Chem Res, 50(10): 6470-6484. https://doi.org/10.1021/ie102462g DOI: https://doi.org/10.1021/ie102462g

Youkai Wang, Huinan Wei, Zhuangwen Li. (2018) Effect of magnetic field on the physical properties of water. Results in Physics, 8: 262-267. https://doi.org/10.1016/j.rinp.2017.12.022 DOI: https://doi.org/10.1016/j.rinp.2017.12.022

Wang XY, Zhang B, Gong Z, Gao K, Ou Y, Zhang J. (2013) The effect of a static magnetic field on the hydrogen bonding in water using frictional experiments. J Mol Struct, 1052(11): 102-104. https://doi.org/10.1016/j.molstruc.2013.08.021 DOI: https://doi.org/10.1016/j.molstruc.2013.08.021

Cai R, Yang H, He J, Zhu W. (2009) The effects of magnetic fields on water molecular hydrogen bonds. J Mol Struct, 938(1-3): 9-15. https://doi.org/10.1016/j.molstruc.2009.08.037 DOI: https://doi.org/10.1016/j.molstruc.2009.08.037

Toledo EJL, Ramalho TC, Magriotis ZM. (2008) Influence of magnetic field on physical–chemical properties of the liquid water: insights from experimental and theoretical models. J Mol Struct, 888(1-3): 409-415. https://doi.org/10.1016/j.molstruc.2008.01.010 DOI: https://doi.org/10.1016/j.molstruc.2008.01.010

Umarov EO, Mardonov UT. (2020) Analysing the effect of magnetic field on Lubricoolant in machining process. International Journal of Applied Research, 6(5): 347-352. https://www.allresearchjournal.com/archives/?year=2020&vol=6&issue=5&part=F&ArticleId=6723

Turakhodjaev N, Tashbulatov Sh, Zokirov R, Tursunbaev S, Baydullaev A. (2020) Studying the scientific and technological bases for the processing of dumping copper and aluminum slags. Journal of Critical Reviews, 7(11): 441-444. http://dx.doi.org/10.31838/jcr.07.11.79