TY - JOUR AU - Ali, Mohammad AU - Nuruzzaman, Dewan AU - Akira, Nakajima AU - Mawatari, Toshifumi PY - 2010/09/29 Y2 - 2024/03/29 TI - DURABILITY AND TRIBOLOGICAL PROPERTIES OF THERMALLY SPRAYED WC CERMET COATING IN LUBRICATED ROLLING WITH SLIDING CONTACT JF - IIUM Engineering Journal JA - IIUMEJ VL - 8 IS - 1 SE - Articles DO - 10.31436/iiumej.v8i1.87 UR - https://journals.iium.edu.my/ejournal/index.php/iiumej/article/view/87 SP - 49-62 AB - Durability and tribological properties of thermally sprayed WC-Cr-Ni cermet coating were investigated experimentally in lubricated rolling with sliding contact conditions. By means of the high energy type flame spraying (Hi-HVOF) method, the coating was formed onto the axially ground and circumferentially ground roller specimens made of a thermally refined carbon steel. In the experiments, the WC cermet coated steel roller was mated with the carburized hardened steel roller without coating in line contact condition. The coated roller was mated with the smooth non-coated roller under a contact pressure of 1.0 or 1.2 GPa, and it was mated with the rough non-coated roller under a contact pressure of 0.6 or 0.8 GPa. As a result, it was found that in general, the coating on the circumferentially ground substrate shows a lower durability compared with that on the axially ground substrate and this difference appears more distinctly for the higher contact pressure for both smooth mating surface and rough mating surface. It was also found that there are significant differences in the tribological properties of WC cermet coating depending on the contact pressure. In addition, depending on the smooth or rough mating surface, remarkable differences in the tribological properties were found. ER -