TY - JOUR AU - Khalid, Asad A. PY - 2012/09/28 Y2 - 2024/03/29 TI - Wear Behavior of Woven Roving Aramid / Epoxy Composite under Different Conditions JF - IIUM Engineering Journal JA - IIUMEJ VL - 3 IS - 2 SE - Articles DO - 10.31436/iiumej.v3i2.364 UR - https://journals.iium.edu.my/ejournal/index.php/iiumej/article/view/364 SP - AB - <p>Wear behavior studies of aramid woven roving /epoxy composite has been conducted. Sliding the material against smooth steel counter face under dry and&nbsp; lubricated with oil conditions has been investigated. Powder of Silicon carbide has been mixed with the epoxy resin and tested also. The powder was mixed in a volumetric fraction of 10% with the epoxy resin. Four Laminates of six layers were fabricated by hand lay up&nbsp; method. A pin on disc apparatus has been fabricated to conduct the sliding wear tests on specimens of (4 mm&nbsp;&nbsp; 4 mm&nbsp;&nbsp; 12 mm) in size have been cut from the four laminates. The effect of sliding condition including dry, lubricated, dry with additives and lubricated with additives have been studied. Wear rate tests have been conducted at different sliding speeds and loads. Results show that the wear characteristics are influenced by the operating conditions and the construction of the composite material used. It was also found that the wear of aramid /epoxy composite onto the steel counter face were significantly reduced by using lubricant and additives but still took place.</p><p>Keywords: Wear, Composite materials, Woven roving aramid, Epoxy, Additives, Lubricant.</p> ER -