STAMINA OF A GASKETED BOLTED FLANGED PIPE JOINT UNDER DYNAMIC LOADING

Authors

  • Muhammad Abid

DOI:

https://doi.org/10.31436/iiumej.v17i2.565

Abstract

Gasketed bolted flange joints are the most critical components in pipelines for their sealing and strength under operating conditions. Most of the work available in literature is under static loading, whereas in industry, cyclic loads are applied due to the vibrating machinery such as motors, pumps, sloshing in offshore applications and in the ships etc. In this study a three dimensional finite element analysis of a gasketed joint is carried out using a spiral wound gasket under bolt up and dynamic operating conditions (internal pressure, axial and bending) singly and in combination. The cyclic axial loads are concluded relatively more challenging for both the sealing and strength of the joint. Higher magnitudes of loads and frequencies are also observed more challenging to the joints performance.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

1. Abid, M. (2000), “Experimental and Analytical studies of conventional (gasketed) and uncoventional (non gasketed) flanged pipe joints (with special emphasis on the engineering of 'joint strenght' and 'sealing')”, PhD Thesis.
2. Abid, M. and Hussain, S. (2007), “Bolt preload scatter and relaxation behavior during tightening a 4 in-900# flange joint with spiral wound gasket”, proc. IMech Vol.222 Part E: J. Process Mechanical Engineering, pp. 123 – 134.
3. ANSYS Inc. (2011), “ANSYS elements manual”, 13th edition.
4. American Society of Mechanical Engineering (1998), “ASME Boiler and Pressure vessel Code Section VIII, Part D:” New York, USA.
5. ASME PCC-1-2000, “Guidelines for Pressure Boundary Bolted Flange Joint Assymbly”, An American National Standard.
6. Gaul, L. and Lenz, J. (1997), “Nonlinear dynamics of structures assembled by bolted joints”, Acta Mechanica 125 (1–4), pp. 169–181.
7. Ibrahim, R. A. and Pettit, C. L. (2005), “Uncertainties and dynamic problems of bolted joints and other fasteners”, Journal of Sound and Vibration, pp. 857 – 936.
8. Jalali, H. Ahmadian, H. and Mottershead, J. E. (2007), “Identification of nonlinear bolted lap-joint parameters by force-state mapping”, International Journal of Solids and Structures, pp. 8087 – 8105.
9. Khan, N. B. (2009), “Stamina of Gasketed Pipe Flange Joint under Combined Loading: 3D FEA Study”, MS thesis.
10. Lina, T. Lia, R. Long, H. and Ou, H. (2006), “Three-dimensional transient sealing analysis of the bolted flange connections of reactor pressure vessel”, Nuclear Engineering and Design, Volume 236, Issue 24, pp. 2599 – 2607.
11. Luan, Y. Guan, Z. and Cheng G. (2010), “The Study on Nonlinear Dynamic Behaviors of the Structures with Bolted-Flange Joint”, IOP Conf. Series: Materials Science and Engineering 10
12. Miller, H. L. (2001), “Piping Vibration Involving Control Valves”, International Joint Generation Conference and Exposition ASME International - Power Division.
13. Nagata, S. Shoji, Y. and Toshiyuki, S. (2002), “A Simplified Modeling Of Gasket Stress-Strain Curve For FEM Analysis In Bolted Flange Joint Design”, ASME International PVP Conference, BC Canada, pp. 53-58.
14. Ouyang, H. Oldfield, M.J. Mottershead, J.E. (2006), “Experimental and theoretical studies of a bolted joint excited by a torsional dynamic load”, International Journal of Mechanical Sciences, pp. 1447 – 1455.
15. Semkea, W. H. Bibel, G. D. Jerath, S. Guravb, S. B. and Webster, A. L. (2006), “Efficient dynamic structural response modelling of bolted flange piping systems”, International Journal of Pressure Vessels and Piping, pp. 767 – 776.
16. Tanlak, N. Sonmez, F. and Talay, E. (2010), “Detailed and simplified models of bolted joints under impact loading”, The Journal of Strain Analysis for Engineering Design, pp. 213 – 225.
17. Wilcoxon Research. Pump monitoring with Wilcoxon piezoelectric accelerometers, “http://www.wilcoxon.com”.

Downloads

Published

2016-11-30

How to Cite

Abid, M. (2016). STAMINA OF A GASKETED BOLTED FLANGED PIPE JOINT UNDER DYNAMIC LOADING. IIUM Engineering Journal, 17(2), 137–155. https://doi.org/10.31436/iiumej.v17i2.565

Issue

Section

Articles

Most read articles by the same author(s)

1 2 > >>