Review on Development of Ceramic Membrane From Sol-Gel Route: Parameters Affecting Characteristics of the Membrane

Authors

  • M. R. Othman and H. Mukhtar School of Chemical Engineering, Universiti Sains Malaysia, Perak Branch Campus, 31750 Tronoh, Perak, Malaysia

DOI:

https://doi.org/10.31436/iiumej.v1i2.334

Abstract

The importance of laboratory scale ceramic membrane preparation using sol-gel technique with pore sizes in the range of 1-10nm is reviewed. Parameters affecting the characteristics of membrane during membrane development are highlighted and discussed in detail. Experimental results from literatures have shown that the correct amount of acid, water, PVA, appropriate membrane thickness, proper control of drying rate, and appropriate temperature profile selection during sintering process are necessary in order to acquire sufficient strength and reduce the formation of crack in the membrane. The different temperature setting during sintering process also influences the size of pore formed.

Key Words: Sol-Gel, Inorganic Membrane, Ceramic Membrane, Gas Permeation, Sintering, Sol Properties, Membrane Morphologies, Pore Size Distribution.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

Downloads

How to Cite

H. Mukhtar, M. R. O. and. (2012). Review on Development of Ceramic Membrane From Sol-Gel Route: Parameters Affecting Characteristics of the Membrane. IIUM Engineering Journal, 1(2). https://doi.org/10.31436/iiumej.v1i2.334

Issue

Section

Articles